intgenx
intgenx's picture
Offline
Last seen: 10 years 7 months ago
Joined: Aug 9 2013 - 12:19am
Need sub-woofer in the US$1000-$2000 range. Is the Genelec 7060 the best sub in the world at this price? Read more: http://www.
Bill B
Bill B's picture
Offline
Last seen: 9 years 5 months ago
Joined: Jul 28 2012 - 1:59pm
intgenx wrote:

has to perform (fidelity not SPL) .... the best sub in the world (for fidelity and low distortion) ... main performance criteria being very low distortion, high fidelity/accuracy/transparency, tight, clean bass. SPL is not the most important factor. .... with the best fidelity/accuracy/transparency, tight clean distortion free bass is my most important criterion - not loudness/SPL. .. do not plan on playing it with blow me off my seats loudness ... a set that is accurate/ transparent, without rattling and unwanted vibrations etc. I'm not looking for earth shattering bass - just accurate, clean distortion free bass ...  want the best (most accurate, transparent) sub out there ...criteria will remain the same - tight bass, low distortion, no rattling, power efficient etc...the "Best" sub there is not just "very good or excellent" ...categories: tight bass, low distortion, low waste due to heat or noise, accuracy/transparency,etc

So, you primarily just want high SPL's/loudness? 

j/k!

Typically, ported subwoofers are less good at tight/clean/low distortion bass than sealed subwoofers.  The Genelecs you mention are ported.  And the ported design is probably the largest part of them being rated so efficient/loud.  Have you heard them?  (I haven't, so I can't testify to their sound.)

intgenx
intgenx's picture
Offline
Last seen: 10 years 7 months ago
Joined: Aug 9 2013 - 12:19am

Thanks folks - I'm wondering if someone did a shoot-out of subs with Genelec 7060 as one of the contenders and how it fared. I'm considering KK DXD808 vs Genelec 7060.

I'm not just buying SQ but the experience of a brand - its important that the brand have a storied past or a legend behind it - the halo effect if you will. Apart from the SQ, Hi-Fi etc I'd want the bragging rights of finding that unique brand (for eg BMW 3series) that is not exactly for the common man but for only those in the know with a truly refined taste. Genelec seems to have it and KK to an extent (assuming KKs are made in USA)

 

SVS, HSU etc seem too common...and if SVS has a dealership in India and firm prices - its gotta be as common as a Toyota Corolla or Honda Civic

btw: I can't go demo the SVS as it is a 10 hr drive to the neighboring state and they don't have a try it and return policy and shipping costs and interstate taxes are high...

Bill B
Bill B's picture
Offline
Last seen: 9 years 5 months ago
Joined: Jul 28 2012 - 1:59pm

Ok. I'm not too familiar with Genelec other than knowing they are much more used in "pro audio" for recordin/mixing etc. so they have much less of an audiophile halo about them,  I'm not saying anything negative about them - except for an impression that they are in the "ruthlessly revealing" category,which is useful in analyzing ones mixes as you get them down on tape. Some people find that type of speaker hard or harsh in a home environment. With your home's hard/reflective surfaces,a harsh treble could be emphasized. 

I hope someone who has actually listened to genelecs will chime in here. 

For storied/legendary brands in audio, I think of Quad, KEF, B&W, McIntosh, Vandersteen, Martin-Logan, JBL, Linn, etc. Those are more like BMW, Jaguar, etc to me. 

While I'm flapping my lips, for my taste the genelecs are pretty ugly. No offense intended, you didn't design them. 

intgenx
intgenx's picture
Offline
Last seen: 10 years 7 months ago
Joined: Aug 9 2013 - 12:19am

I started out thinking the Genelecs were ugly... then they started looking plain and then they started looking downright cute and loveable - like a bunny rabit... it just grew on me...

and I'm quite used to the same experience when it comes to women... the hottie that every one went after always seemed quite beyond my reach and later found to be hollow and not my type at all... 

well I don't know what many audiophiles like and why they don't go for true pro-grade studio speakers which are made for true fidelity and used in the production process for the music/movies which the audiophiles later listen on - why listen to the speaker makers interpretation of the sound the sound director or musician made when you should be hearing what they heard when the mixes were made.

The flashy/glossy fancy looking designs aren't my thing either - what matters to me most is fidelity and that's why I chose active studio monitor speakers and specifically Genelecs (and the other worthy active speaker competitors were Focal, ADAM, PMC, ATC etc - none of the brands you mentioned but these brands have serious studio cred and are truly hi-fi not pseudo hi-fi)

 

Now when it comes sub-woofers there are many manufacturers who make very good subs - as subs have mostly been active from day one...

so I might have a bigger choice... I'll take a look at Quad, Vandersteen and Linn and see what they have to offer..

any other storied and legendary suggestions.. btw: they all have to be made in the country the brand belongs to...I do have a problem with brands that claim "designed/engineered in ....USA/UK/Germany etc but made in China" -  if I'm buying Scotch - it better be distilled/blended/bottled in Scotland and when I know I'm looking for sparkling bubbly made by the champagne method - I know for sure I'm not buying Champagne... its all about terroir...

 

Bill B
Bill B's picture
Offline
Last seen: 9 years 5 months ago
Joined: Jul 28 2012 - 1:59pm

That's cool and there's plenty of room for variation in aesthetics.  I get your point about studio monitors.  The thing is, if they are "perfect", then anything else is inferior - that premise does correctly lead to that conclusion.  On the other hand, if Genelecs, PMC's, etc are less than perfect, then they have a character, as do more "audiophile" speakers.  Therefore, I think good implementations of different designs all have their strengths, so I think it will limit you if you go for just studio monitor types.  Of course there is a wide overlap.  B&W, for instance, is well positioned and regarded in both "audiophile" and "pro audio" worlds - as are several other brands.

The studio monitors I have heard (not Genelecs) are indeed ruthlessly revealing, and that is essential to an engineer when recording.  But they did not seem good at all at soundstaging and a sense of depth or space, and at home I value those qualities too (those qualities in the studio are probably a bonus but not necessary to the work).

For subwoofers, very accurate, deep, powerful (& expensive) ones, with prestigious names also include Velodyne, REL, B&W, and others.  One of the best direct sellers and value for the money (not sure how shipping to Bangalore would work) is Rhythmik.

intgenx
intgenx's picture
Offline
Last seen: 10 years 7 months ago
Joined: Aug 9 2013 - 12:19am

i compared the top of the line B&W 800D to the Genelec 8260 and they were quite on par in performance... but the 8260 was less 1/3rd the price of the 800D

that's what got me to try the other Genelecs - the 8050 and 8040 and 8030 and the halo effect kicked in... apart from the studio cred and marketing of both brands...

 

Which of these subwoofer makers make their subs in North America/Europe....that's one of my key criteria...

Bill B
Bill B's picture
Offline
Last seen: 9 years 5 months ago
Joined: Jul 28 2012 - 1:59pm

Great, If you got to listen and decide for yourself, then that's ideal. 

I don't know where all the brands/models are manufactured. I know Vandersteen is all in house and all in Hanford, California, USA.  I think Rhythmik is all USA except they have their cabinets made in China. 

intgenx
intgenx's picture
Offline
Last seen: 10 years 7 months ago
Joined: Aug 9 2013 - 12:19am

Have you all heard or heard of
the Martin Logan Depth i - surely fits the budget, size, brand and performance wise...and i believe its made in Canada...

the only minor issue is that - it has no XLR input... (available on the Descent i - which goes into the $3200 category).
Dont you think XLR input is something a serious hi-fidelity equipment at the $2200 price point ought to have...not sure why Martin Logan cheaped out on such a small thing. Not knowing where in the room it will need to be placed and the Depth/Descent i are apparently known for requiring much more precise placement than other single/dual subs - I'd surely like to run balanced cables if need be (because the Genelec G4 and G3 speakers have both RCA and XLR).

 

ok so its 

Seaton SubM vs Martin Logan Depth i vs Acoustic Energy Pro-Sub vs Genelec 7060 vs 2 x ADAM Sub 10 vs 2 X Focal CMSSub vs Neumann KH810

 

WAF apart - not sure if it will be completely worth it to jump to the next higher price bracket:

Paradigm - Sub 1 vs Martin Logan - Descent i vs Genelec 7070 or 2 x 7060

in which case do other competitors enter the picture?

 

 

Pl. give your thoughts...

Bill B
Bill B's picture
Offline
Last seen: 9 years 5 months ago
Joined: Jul 28 2012 - 1:59pm

Narrowed it down to 12 choices?  Sorry, I'm out of ammo.  Maybe someone else will comment but there won't be any real source of direct comparisons between all those.  Plus, considering using 2 subs of some brands and 1 sub of others further complicates comparisons.  It's a moving target.

intgenx
intgenx's picture
Offline
Last seen: 10 years 7 months ago
Joined: Aug 9 2013 - 12:19am

Folks, the Seaton SubMs are having a hard time with the WAF.

A smaller but 2 sub stereo configuration can clear the WAF than one large SubM...

 

I've been slowly opening up to the idea of a DIY...for which there are many enthusiasts willing to help for nothing more than the thrill of having helped a fellow DIYer.

 

What are the features/parameters that I should expect in my sub?

 

I'm thinking the following:

Must have:

1. 10" - dual opposed drives - for vibration/rattle free bass.

2. Sealed cabinet - easier to design and build - than having to optimize or tune the port etc which can be quite complex.

3. Low pass filter for drive protection

4. Needs to have XLR, RCA - gold plated inputs 

5. Max. Cabinet dimensions: 18" x 18" x 24"

6. Level control

7. Clipping and Power surge protection

8. Auto-power on signal

9. No compromise on finish and looks etc...

 

 

Nice to haves:

1. Should I consider adding dual passive radiators as well? a quad driver active/passive design?

2. Cross-over adjustment?

3. Is it advisable to use Hard-wood for cabinet instead of MDF? (other than cost - are there any other advantages to MDF - how about an all aluminum cabinet?)

4. Liquid cooled amplifier - like for a PC?

5. Parallel XLR, RCA (pass through same as input) outputs for daisy chaining

6. High pass filter out for connecting the L/R in stereo mode for 2ch music?

 

 

I will probably have to take the DIY ideas/discussions onto a different thread or should I continue to keep this thread active...

Bill B
Bill B's picture
Offline
Last seen: 9 years 5 months ago
Joined: Jul 28 2012 - 1:59pm

If you go DIY, you know already, or soon will, that you can't just make a list of "must haves", because all the parameters affect each other;  I'm speaking largely about your criteria listing size & number of drivers, along with your specific max dimensions for the cabinet, and sealed vs. ported.  They all interact.  BTW, building a good, strong, non-resonant sealed cabinet is NOT necessarily easier than building a ported box.

Log in or register to post comments
-->
  • X