Reed
Reed's picture
Offline
Last seen: 9 years 8 months ago
Joined: Sep 6 2005 - 5:37am
Eric, Rogue, KT120
Glotz
Glotz's picture
Online
Last seen: 1 min 36 sec ago
Joined: Nov 20 2008 - 9:30am

I really enjoyed Erick's review of the Atlas.  His language was exact and purposeful.  I see the value in this amp, and that is the characteristic I look for most in a component.   His comparisons were valid and insightful as well.  The last line was killer, too!

keremz
keremz's picture
Offline
Last seen: 9 years 7 months ago
Joined: Mar 28 2012 - 1:50pm

I have been thinking about replacing the KT90s with 120 on my Cronos Magnum too, did u have to take the top plate off...any way to keep the top plate and still have 120s?

Kerem

John Atkinson
John Atkinson's picture
Online
Last seen: 22 sec ago
Joined: Nov 7 2010 - 3:31pm

keremz wrote:

I have been thinking about replacing the KT90s with 120 on my Cronos Magnum too, did u have to take the top plate off...any way to keep the top plate and still have 120s?

The KT120 has a larger diameter tha the EL34, approximatekly 2". If the holes in your amp's top plate are too small, you should contact Rogue to see a replacement top plate is available and also to check that your amp can provide the necessary bias current.

John Atkinson

Editor, Stereophile

.

Reed
Reed's picture
Offline
Last seen: 9 years 8 months ago
Joined: Sep 6 2005 - 5:37am

 Yes, you need a replacement top.  Contact Rogue.  I received one from the first batch the had produced.  It costs me $150.

The holes are in the same spot, but bigger.  Thay also sold me the KT120 tubes as well.

Sorry for the late response.

Log in or register to post comments
-->
  • X