XLR8R22
XLR8R22's picture
Offline
Last seen: 11 years 5 months ago
Joined: Apr 20 2011 - 2:58pm
Miscellaneous subwoofers
jackfish
jackfish's picture
Offline
Last seen: 11 years 2 months ago
Joined: Dec 19 2005 - 2:42pm

Attitude AU1050 10" Stamp Frame Woofer: 250 watts RMS/350 watts max; Impedance: 6 ohms per coil; Frequency response: 25-200 Hz; Magnet weight: 50 oz.; Fs: 29 Hz; SPL: 89 dB 1W/1m; Vas: 3.50 cu.ft.; Qms: 8.20; Qes: .45; Qts: .43; Xmax: 9.9mm; Net weight: 9 lbs.; Dimensions: A: 10-1/16", B: 9-1/8", C: 5-1/16", D: 5-1/4", E: 1-1/4"

If your application is music, I would rid myself of your existing subwoofer chattel and build a pair of Critical Q subwoofers. http://www.customanalogue.com/sub_index.htm

XLR8R22
XLR8R22's picture
Offline
Last seen: 11 years 5 months ago
Joined: Apr 20 2011 - 2:58pm

Ideally I would like two subwoofer systems- one for audiophile grade listening and one for big loud thumping wall-shaking beat blasting explosion style bass.  That link looks like it takes care of the first one, any suggestions for the second one?  Could I put the two Attitudes and the Polk in a single box just to be loud?  Or is that crazy?  How would I go about calculating that?

jackfish
jackfish's picture
Offline
Last seen: 11 years 2 months ago
Joined: Dec 19 2005 - 2:42pm

put in a single ported enclosure. You would have to model the enclosure based on the driver parameters.  I wouldn't try to add the Polk driver to the mix. However, you would likely get better results by using two subwoofer enclosures, each with one driver, as you could then place them in the room accordingly to minimize peaks and nulls.

http://www.ajdesigner.com/speaker/bcv.php

http://www.bcae1.com/spboxad2.htm

1crazed Cat
1crazed Cat's picture
Offline
Last seen: 13 years 6 months ago
Joined: Apr 28 2011 - 4:15am

If it's at all possible, I would recommend using 2 subs in seperate enclosures upfront: the ult atts. You can then put a 3rd one behind your chair and turn the level on this 3rd one up just enough to feel it. I have an extra sub that I do this with. It adds to the realism.

XLR8R22
XLR8R22's picture
Offline
Last seen: 11 years 5 months ago
Joined: Apr 20 2011 - 2:58pm

The Ultimate Attitude is the AU1070 model.  Are the specs any different?

jackfish
jackfish's picture
Offline
Last seen: 11 years 2 months ago
Joined: Dec 19 2005 - 2:42pm

they are different.  Without published parameters you might have to measure them off the driver.

http://www.diysubwoofers.org/measure.htm

Log in or register to post comments
-->
  • X