mightypants
mightypants's picture
Offline
Last seen: Never ago
Joined: Oct 20 2007 - 6:20pm
problem with Sony Receiver
Jan Vigne
Jan Vigne's picture
Offline
Last seen: Never ago
Joined: Mar 18 2006 - 12:57pm

Disconnect everything from the receiver. Unplug it from the AC outlet for an hour. Plug it back in and try switching it on before you reconnect anything. If it still has this problem when you power it back up, you probably need a new receiver. Most likely the large scale microprocessor that controls most of the functions of the receiver has gone out. It's not worth repairing this on a ten year old receiver as the cost of the repair will exceed what you paid for the receiver. Buy something with new stuff on it.

delhi_lama
delhi_lama's picture
Offline
Last seen: Never ago
Joined: Oct 29 2007 - 8:58am

'Protect' is activated (1) when an amp overheats or (2) a cross connection happens. If there was a cross connection some processors may have been gone, in which case you may take it to an authorized sony service center. Just check the repair estimate, if its what you'd like, go for a repair, else, you know!

If it was a simpel case of overheating, doing as Van above mentioned would fix the problem.

Log in or register to post comments
-->
  • X