Aris A
Aris A's picture
Offline
Last seen: Never ago
Joined: Sep 28 2005 - 10:35am
subwoofer supplement
Monty
Monty's picture
Offline
Last seen: Never ago
Joined: Sep 16 2005 - 6:55pm

Is there some reason that you can't use a line-out method of connecting the sub? Many subs have line level inputs where the speaker connections from your amp go to the sub and then from the sub to your monitors.

Aris A
Aris A's picture
Offline
Last seen: Never ago
Joined: Sep 28 2005 - 10:35am

Monty,
Thanks...I'll do check that method. Would it matter if the additional sub is powered or not?

Kal Rubinson
Kal Rubinson's picture
Offline
Last seen: 1 day 10 hours ago
Joined: Sep 1 2005 - 9:34am


Quote:
Hello...new to this forum. I do have a question about adding an extra sub to supplement an existing 2 channel setup(preamp, amp, speakers). My preamp has a single output. I'm starting to call up modification services to add a sub-out. Is there an easy and safe alternative way on what I have right now? A friend of mine suggested to split the left channel output but I'm worried what it might do damage in the long run. I could sell the preamp and find a unit that will satisfy the purpose but I'm still going to buy the sub and cables. Can someone recommend a mod service if no way is possible? I live in SoCAL(WCovina area). Thanks.

Find a sub with 2 line-level (L/R) inputs and get two Y-cables.

Kal

Monty
Monty's picture
Offline
Last seen: Never ago
Joined: Sep 16 2005 - 6:55pm

No, it shouldn't make any difference as far as connectivity is concerned. I would opt for a powered sub with an adjustable output and frequency crossover if it is within your budget. If you go for a passive sub, try to match the ohm rating of the sub with that of your speakers.

If you look at the sub pictured above, you will notice that it has provisions for speaker level inputs and outputs as well as line level inputs. You could use the speaker level inputs by running from your amp to the sub and then the speaker level outputs from the sub to your monitors.

Log in or register to post comments
-->
  • X