You are here

Log in or register to post comments
Anonymous (not verified)
Anonymous's picture
Record cleaner for ~$500 USD?

Hi all,

I'm looking to buy a record cleaner (I think?) and am allowing around $500 for it (if needed). It seems like two groups to look at are the VPI and the Nitty Gritty models? Anybody care to offer opinions on these products, or others, or want to tell why I should never spend so much on such a device? :-)

The table is a Project RM-9 with a blue-point special, fyi.

Thanks for any advice!

Al Earz
Al Earz's picture
Offline
Last seen: Never ago
Joined: Sep 13 2005 - 8:24pm
Re: Record cleaner for ~$500 USD?

I can only speak from personnal experience. I had the NG 1.2 and sold it and bought the VPI 16.5 and have been very happy with the decision. The problem with the NG was that you needed a seperate surface for wetting and scrubbing the vinyl then flip the LP over to clean it. With no visable means to monitor the vacuum progress you guess when it done.
The VPI lets you scrub while the record is on the platter so it does the turning for you. Then the clear vacuum tube lets you see the progress as it removes the solution. I really don't understand Nitty Gritty's motives in their design.

amathrodis
amathrodis's picture
Offline
Last seen: Never ago
Joined: Sep 14 2005 - 6:39am
Re: Record cleaner for ~$500 USD?

And look, I even registered once I realized I'd posted as anonymous by accident

Al Earz
Al Earz's picture
Offline
Last seen: Never ago
Joined: Sep 13 2005 - 8:24pm
Re: Record cleaner for ~$500 USD?

Glad to help. One other not I like the VPI fluid but I really prefer the Disc Drs. Miracle Record Cleaner. It seems to suds up a little more and I beleive that indicates more dirt lifting. Also the brushes they offer seem to be better. I still use both. Good luck in finding a good buy.

TroyD
TroyD's picture
Offline
Last seen: Never ago
Joined: Oct 18 2005 - 9:59pm
Re: a Nitty Gritty users view

I think that it really comes down to convenience as I think both can work very well. The VPI is probably a bit more convenient.

BDT

  • X