Jason Victor Serinus
Sort By: Post Date | Title | Publish Date
CES 2011
Jason Victor Serinus Jan 13, 2011 2 comments
Glenn Phoenix, President of Westlake Audio, was touting the loudspeaker company’s cable muffs. Made of foam, the muffs are used to support and separate cables. They are also said to benefit cables that are under-damped.

“We have a rule in the company to keep cables between 2” and 4” apart,” he said. “Putting left and right channels too close together can increase crosstalk, while positioning them too far apart may lead them to generate and pick up interference.” I hope I got that right.

Westlake Audio manufactures cable muffs with a number of different size holes and slots to accommodate a wide assortment of cables other than the extremely thick variety. Prices range between $59.50 and $88/set.

CES 2011
Jason Victor Serinus Jan 13, 2011 1 comments
Gary Koh of speaker manufacturer Genesis was happy to show off the new Absolute Fidelity Interface cables. Being sure to note that the product does not use the Genesis name, because it has been designed to be used with all loudspeaker brands, it has been give its own dedicated Absolute Fidelity website.

“To me, a cable should not function as a component; it should be an interface between two components,” said Koh. “Since every component is different, and draws power differently, I’ve designed different cables to interface between different components.”

The Absolute Fidelity Interface line currently includes the Loudspeaker Interface ($3000/2m pair); Turntable Power interface, Amplifier Power interface, and Component Power interface (each $1800/1m pair); and Component Interface (for use between source components, $1800/0.6m pair).

Koh explained that, a few years back, when he could not find a cable sufficiently transparent to do full justice to his Genesis 1.2 loudspeaker, he began rolling his own. Steve McCormack and a few other designers he works with were so impressed with the cable that they urged him to market it.

“I didn’t really launch them,” Koh said with a smile. “They just started selling. You can call this the official launch.”

CES 2011
Jason Victor Serinus Jan 13, 2011 0 comments
To celebrate the 25th anniversary of Purist Audio Design, founder/designer Jim Aud has just introduced their 25th Anniversary cable. Shown at T.H.E. Show for the first time, the 25th anniversary line consists of interconnects ($8100/1m pair) and speaker cable ($18,000/1.5m pair).

“Basically we’re using solid silver, single crystal wiring surrounded by Ferox 103, which is a proprietary doped silicon,” Aud explained. “Our other cables only use copper or copper alloys, and don’t use the Ferox 103.” While Purist still makes two cables that contain fluid, the 25th Anniversary cabling does not.

CES 2011
Jason Victor Serinus Jan 13, 2011 0 comments
Debuting at CES 2011, Running Springs Audio’s Elgar Powerline conditioner is so new that Dan Babineau has yet to produce product literature. A trickle-down, opening price-point piece ($999/6 outlets), it can handle 1800W maximum. The 100% passive, non–current-limiting design employs the same filters as all other Running Springs Audio products, but uses a smaller-laminate inductor to increase dynamics.

Designed for smaller, modest systems, the Elgar Powerline conditioner is hand-built in Anaheim, CA. “It does three things really,” Babineau said. “A high quality circuit breaker, it also takes care of atrocious noise anomalies, and cleans up the power without negatively affecting the source. This has always been my goal since I started the company ten years ago.”

CES 2011
Jason Victor Serinus Jan 13, 2011 0 comments
Distributed for the first time in the US by Robert Kelly of Kelly Audio Technologies in San Diego, the unusually designed Bertram cable comes in copper, silver, and gold configurations. Pictured is Proxima 2 balanced silver interconnect ($8000/1.5m pair).

Designed by Soren Bertram of Denmark, Proxima 2’s silver ribbon wire is flattened and twisted into what looks like a braid. Boasting an air dielectric and laser-welded terminations, it is third down from Bertram’s top-of-the-line. Also available are the Proxima 2 silver speaker cable ($25,000/2m pair), signal cables, and power cords.

Some readers may recognize Kelly as the former speaker designer for EgglestonWorks and Cello. Out of the business for a number of years, he has returned with an intriguing portfolio of Scandinavian-sourced products.

CES 2011
Jason Victor Serinus Jan 13, 2011 0 comments
Symposium Acoustics has released its upgraded Turntable Top Aircell Level ($1499). Designed to be used with Symposium’s visually arresting Isis Rack, the Turntable Top provides isolation and damping through four AirCell isolators that are level-adjustable for off-center loads. This means that if you have a table or transport with a heavy motor or power supply on one side, you can still level the shelf. Leveling is accomplished via four small underside holes, one in each corner quadrant of the platform, that are accessed with a supplied 1/8” Allen key.
CES 2011
Jason Victor Serinus Jan 13, 2011 0 comments
Jim Fosgate’s forthcoming Signature headphone amplifier (right), scheduled for release in the second quarter of 2011, has an industrial design that echoes his Signature phono stage (left). Combining a tube input stage with a solid-state output, it will include a loudness control, spatial enhancement circuit, and built-in DAC. Scheduled for distribution by Musical Surroundings of glorious Oakland, CA, its price has yet to be determined.
CES 2011
Jason Victor Serinus Jan 13, 2011 0 comments
Kerem Kücükaslan, whose surname means “Little Lion,” was born in Istanbul, where he resides for at least part of the year. Fluent in English, he received his BS in industrial engineering at WPI and a minor degree at MIT.

Kücükaslan founded Echole four years ago in New Hampshire. On display at T.H.E. Show was the complete line of Obsession Signature: speaker cable ($11,000/6ft pair), interconnects ($7500/3ft pair), and power cords ($6850/6ft).

Parts for Echole’s two cable lines, Echole Obsession and Echole Obsession Signature, are manufactured in both the US and Turkey. The wire, which is manufactured in Japan, consists of a proprietary ratio of silver, gold, and palladium. (The Obsession line has less gold and palladium that the Obsession Signature).

CES 2011
Jason Victor Serinus Jan 12, 2011 4 comments
The Stein Music Harmonizers (approx. $1100 each; distributor Walter Swanborn of Fidelis AV is putting together package deals that include Stein’s Harmonizer accessories) are one of those mysterious sound-improving devices that are hard to explain to those who have not heard them. They certainly impressed Sam Tellig, who recently discussed them in his monthly Stereophile column.

They’ve also impressed me greatly. A set of four Stein Harmonizers has been residing in my reference system in Oakland for several months, bringing me much pleasure. To these ears, when set up correctly, they have a far from subtle effect on three-dimensionality, transparency, and realism. They take me one step closer to the real thing, making what comes out of my speakers sound less like hi-fi and more like music.

I was delighted to spend some time at T.H.E. Show with the Harmonizers’ designer, Holger Stein of Germany. Stein was showing the newest version of the Harmonizers, which were five years in the making.

The latest Harmonizers have a three-position switch on the rear. Those positions are (1) on with light, (2) on without light to preserve battery life for up to two years, and (3) off, to save energy when the system is not playing. Besides that, they function identically to their predecessor (which I have).

So how does the Stein Harmonizer work? Best to quote directly from Stein. Since, for him, English is a second language, I’ve given him an assist in the editing department:

CES 2011
Jason Victor Serinus Jan 12, 2011 0 comments
Wireworld’s David Salz released two new USB cables, the Platinum Starlight ($600/1m) and the Silver Starlight ($300/1m). The Platinum Starlight USB uses molded carbon-fiber connectors, while the Silver Starlight uses aluminum connectors.

Both cables use a new technology, called DNA Helix, that Salz originally developed for use in Wireworld’s premiere PS and SS HDMI cables. DNA Helix utilizes twice as many signal conductors as conventional USB cable designs.

When Salz was first developing the DNA Helix design, he began to measure the transmission speed of cables. By designing a more efficient cable, he found he was able to increase transmission speed by 20%.

“I always start with the direct connection as my reference,” he explains. “What I heard from cables at the start of my work was really disappointing. This new design allows me to get substantially closer to the purity of the direct connection.”

Site Map / Direct Links