There's virtue in being in the right place at the right time. The right place in this story was the headquarters of Acoustic Research in Boston, MA, and the right time was just a couple of weeks or so before the subject of this piece was to be shown (but not heard) at a press conference in New York. Even within that short two weeks, the rot started to set in. What I saw (and heard) in Boston on that occasion was a loudspeaker that stakes a reasonable claim on being revolutionary. A rare event that. The project name was The Magic Box and I was hoping that is what it might have been called when it went on sale. The Magic Box does, after all, conjure up an image of something a little special, and it's also easy to remember.
I was all set to give up on moving magnets until the new Shure VI5-VMR (MR stands for Micro-Ridge stylus) arrived. In a word, it's terrific. I was slightly disappointed with the original V15-V: I just didn't think it was a significant improvement over the Type IV. What I missed was fine detailespecially in the high frequencies and during heavily modulated passages. The original V was not quite up to the sound of certain moving coils. Which is not to say the original V was a bad buy: moving coils cost twice the price and you need a stepup. I could recommend the original V without hesitation.
It says something for the state of technology that, after a quarter of a century, there still is no authoritative explanation for why so many high-end audiophiles prefer tubes. Tubes not only refuse to die, they seem to be Coming back. The number of US and British firms making high-end tube equipment is growing steadily, and an increasing number of comparatively low-priced units are becoming available. There is a large market in renovated or used tube equipmentI must confess to owning a converted McIntosh MR-71 tunerand there are even some indications that tube manufacturers are improving their reliability, although getting good tubes remains a problem.
It says something for the state of technology that, after a quarter of a century, there still is no authoritative explanation for why so many high-end audiophiles prefer tubes. Tubes not only refuse to die, they seem to be Coming back. The number of US and British firms making high-end tube equipment is growing steadily, and an increasing number of comparatively low-priced units are becoming available. There is a large market in renovated or used tube equipmentI must confess to owning a converted McIntosh MR-71 tunerand there are even some indications that tube manufacturers are improving their reliability, although getting good tubes remains a problem.
It says something for the state of technology that, after a quarter of a century, there still is no authoritative explanation for why so many high-end audiophiles prefer tubes. Tubes not only refuse to die, they seem to be coming back. The number of US and British firms making high-end tube equipment is growing steadily, and an increasing number of comparatively low-priced units are becoming available. There is a large market in renovated or used tube equipmentI must confess to owning a converted McIntosh MR-71 tunerand there are even some indications that tube manufacturers are improving their reliability, although getting good tubes remains a problem.
The Audio Research D-160B has been heavily modified since the D-160A, and uses the same technology as the D-70, D-115, and D-250. It embodies William Z. Johnson's latest transformer and power supply designs, his latest choice of capacitors and resistors, and the same independent regulation of screens, drivers, and front end. D-160s and D-160As can be converted to D-160Bs for $1500.
High-quality, low-cost loudspeaker systems are not an everyday blessing. The Rogers LS3/5a has survived for more than a decade precisely because so few US manufacturers sought musical accuracy as distinguished from high output and powerful bass. The economics of loudspeaker manufacture also don't lend themselves to economy. The cost of woodwork is driving the price of speakers up almost as fast as the cost of sheet-metal work is escalating the price of electronics.