Michael Fremer

Sort By: Post Date | Title | Publish Date
Michael Fremer Posted: Jul 15, 2008 0 comments
It's now been eight years since a Rega P3 turntable passed through my listening room. While the new P3-24 superficially resembles the P3 (and virtually every other Rega 'table), the company has made some significant changes, including upgrading to the high-quality, low-voltage (24V), electronically adjusted motor used in the more expensive P5, P7, and P9. As in those models, an electronic circuit trims the phase angle of the P3-24's motor coils, thus substantially reducing motor vibrations. In 1998, during a factory tour, a Rega engineer demonstrated the circuit's effectiveness to me. As he adjusted the circuit board's pot, vibrations from the motor dramatically decreased, until it was difficult to tell if the motor was spinning or not. Back then, this "hand-trimmed" motor technology was available only in the P9. The P3-24 uses a less sophisticated version of the same basic idea.
Filed under
Michael Fremer Posted: Mar 28, 1999 0 comments
I literally dropped everything when Rega's new Planar 25 turntable arrived a few weeks ago. I'd heard the 'table compared with the Planar 3 at designer Roy Gandy's house when I visited Rega last fall—see "Analog Corner" in the January '99 Stereophile—and was anxious to audition it in my own system and tell you what I heard.
Michael Fremer Posted: Aug 18, 2002 0 comments
Antares is a giant red star in the constellation Scorpio. According to Rockport Technologies' Andy Payor, the $41,500/pair Antares loudspeaker is the "ultimate" reasonably sized, full-range loudspeaker, and is built to a standard "unequaled in the industry." Rockport's $73,750 System III Sirius turntable came with equally boastful claims that turned out to be anything but hyperbole. Has Rockport done it again with the Antares?
Michael Fremer Posted: Sep 19, 2004 Published: Sep 01, 2004 0 comments
No one has ever accused Rockport Technologies' Andy Payor of under-engineering a product, and this set of gleaming black beauties is no exception. The system is available in two configurations: as the two-way Merak II for $19,500/pair, including sturdy custom cradle-stands with integrated crossover; and as the Merak II/Sheritan II, a three-way, two-box floorstander that, to afford them at $29,500, will reduce some to living in the speakers' shipping crates. You could do worse for housing than checking into the Sheritan Rockport: The wooden crates are almost exquisitely finished.
Michael Fremer Posted: Aug 20, 2000 0 comments
Andy Payor hurls a briefcase full of engineering and scientific mumbo-jumbo at in an attempt to justify the $73,750 price of the latest and greatest edition of his Rockport Technologies turntable, but really—isn't this all-air-driven design a case of analog overkill? After all, defining a turntable's job seems rather easy: rotate the record at an exact and constant speed, and, for a linear tracker, put the stylus in play across the record surface so that it maintains precise tangency to a radius described across the groove surface. By definition, a pivoted arm can't do that, so the goal there is to minimize the deviation. That's basically it. Right?
Filed under
Jon Iverson Michael Fremer Posted: Apr 05, 2003 Published: Apr 06, 2003 0 comments
At the 2003 Consumer Electronics Show in January—see the report in this issue—Sony and Philips held an SACD Event at the Hard Rock Hotel in Las Vegas. There were trippy lights. There were the Grand Pooh-Bahs of Sony, Philips, and the record labels. There was loud multichannel Big Brother and the Holding Company. And there was Sony's main SACD man in the US, David Kawakami, supplying the pep talk.
Filed under
Michael Fremer Posted: Aug 19, 2010 0 comments
The minuscule electrical output of an analog signal from a moving-coil cartridge needs to be boosted before it can be converted to digital and equalized in the digital domain. Of course, you could use your current phono preamplifier and record an equalized signal to hard disk, but then you wouldn't get to experience Pure Vinyl's digital RIAA correction—nor would you be able to avail yourself of all the equalization curves provide by Pure Vinyl, of which there are almost too many to count.
Filed under
Michael Fremer Posted: Aug 19, 2010 1 comments
The minuscule electrical output of an analog signal from a moving-coil cartridge needs to be boosted before it can be converted to digital and equalized in the digital domain. Of course, you could use your current phono preamplifier and record an equalized signal to hard disk, but then you wouldn't get to experience Pure Vinyl's digital RIAA correction—nor would you be able to avail yourself of all the equalization curves provide by Pure Vinyl, of which there are almost too many to count.
Michael Fremer Posted: Jul 06, 2000 0 comments
Why would a sharp mind offer a $15,000 integrated digital amplifier to a reviewer who has been characterized in the audio press as the "self-proclaimed Analog Messiah" and a "hyper-Luddite"? That's the first question a self-centered reviewer asks himself. Yours might be: "A $15,000 integrated amplifier from...Sharp?"
Michael Fremer Posted: Oct 10, 2014 0 comments
Among the biggest buzzes at the January 2013 Consumer Electronics Show, and at Munich's High End Show the following May, was the sound in the room of Siltech BV, a Dutch company best known for its high-end cables. Siltech was demonstrating an innovative new power amplifier, and using it to drive the company's glass-cabineted Arabesque loudspeakers ($90,000/pair). The sound was unmistakably lush yet also remarkably linear, notably dynamic, and seemingly free of electronic artifacts. It sounded like the sound of "nothing"—which was really something!—and so much of a something that it caught the attention of many reviewers. But while there's often controversy and disagreement about a given product's sound quality, this time the enthusiasm seemed unanimous.

Pages

X
Enter your Stereophile.com username.
Enter the password that accompanies your username.
Loading