RMAF 2012

On the Mezzanine Level, in the Crestone Peak room, Musical Surroundings put together an audacious, high-aspirations system:

High Fidelity Services of Braintree, MA was producing good, solid sound on well-recorded rock on a system that mixed two products it imports and distributes, Neat Acoustics’ Ultimatum XL6 loudspeakers ($14,280/pair) and Scheu Analog’s Das Laufwerk 1 turntable with 12" Tacco arm and Scheu/Benz cartridge ($15.995), with Zanden’s Model 2500 CD player ($22,000), Model 6000 integrated amplifier ($22,000), and 1300 phono stage ($13,750); Running Springs’ Maxim power conditioner ($6400); and Chord Cable Company’s SArum cabling ($8400).

Mike Hopkins of Aperion Audio has reason to smile. The Aperion Verus Grand ($1798/pair), a three-way tower loudspeaker with a frequency response of 45Hz–22kHz, 6 ohms impedance, and 92dB sensitivity, was being fed by a Marantz SA 1153 SACD player and PM 1153 integrated amplifier via Straight Wire cabling, and delivering a very nice, complete presentation of Belinda Carlisle's cover of "Hallelujah."

Nordost’s Lars Christensen has become an industry legend of sorts for the enthusiasm with which he launches into cable comparison after cable comparison. At RMAF, he notched his demos up several steps, inviting people to hear the effects that cabling, power distribution, and resonance control products from Nordost and other companies can have on system sound.

“The bottom line is, despite the science involved, if you can’t hear it, it matters not,” Nordost’s West Coast distributor Michael Marko told me outside the demo room...

As familiar as I may be with the Playback Designs/Evolution Acoustics set-ups that Blue Light Audio's Jonathan Tinn brings to shows—one of these, with darTZeel electronics and much bigger Evolution Acoustics loudspeakers, received my Best of Show at T.H.E. Show Las Vegas a few years back—I constantly find myself amazed by the quality of the sound. This time, with Playback Design's MPS-3 DSD-capable high-resolution CD player with USB input ($8500); an Ampex ATR-102 open-reel recorder, restored by ATR Services, Inc of York, PA, playing 15ips master tapes sourced from ATR and Puget Sound Studios; and B.M.C. Audio's AMP CS2 integrated stereo amplifier ($8400) driving Evolution Acoustics' MMMicroOne 2-way monitor loudspeakers with stands ($2500/pair), the sound of a Shelby Lynne demo safety copy of her new album, provided by ATR Services, blew me away with its solid bass, powerful slam, and great depth. True, there was a bit of an edge on Lynne's voice, but it may have been room-induced, and sure didn't stop me from writing "OMG" in my notes.

Ann Arbor, Michigan’s Paragon Sight & Sound put together another high-performance, cost-no-object system: Wilson Audio MAXX Series 3 loudspeakers ($69,500/pair); Doshi Audio (“Audio Products for Music Lovers”) Alaap v3.0 NAB tape preamp ($10,995), Alaap v3.0 line stage ($14,995), Alaap v2.1 phono stage ($10,995), and Jhor 160 monoblock power amplifier ($28,995/pair); SME 20/3 turntable ($15,500 with SME’s Series V tonearm) and Koetsu Urushi Vermillion cartridge ($5850); and Transparent Audio cables. The gear was supported by Harmonic Resolutions Systems racks. I didn’t listen to any digital while I was in the room, but digital was being handled by a Wadia S7i CD player and a Playback Designs MPD-5 Reference DAC.

Visual aesthetics were clearly not the main priority in room 431. Pictured is Polk Audio's LSiM 707 loudspeaker ($4000/pair), driven by an unseen Oppo 83 SE used as a transport, the excellent Peachtree DAC/Pre ($4700), and, on the computer end, a Macbook Pro running Amarra 2.4.2 via an Audioquest Carbon USB cable. Audioquest Rocket 88 cabling, PS Audio P10 power conditioner, XLO-10 power cords, and room treatment completed a system that, on George Benson's classic recording of "The Ghetto"—a song that doesn't sound remotely like the predominantly Mexican, multi-ethnic and multi-national ghetto in which I live—sounded like solid hi-fi.