Pseudo-Random Noise

John Atkinson runs a set of measurements on the Vivid Audio G1Giya. Here, we see the Giya turning at five degree intervals, while a pseudo-random series of pulses is used to calculate impulse response.

For images of the fun, visit our Gallery. For much more info on how and why John Atkinson measures loudspeakers, go here, here, and here.

Share | |
Comments
John Atkinson's picture

While DRA Labs MLSSA measurement signal sounds like noise, it is in fact a pseudo-random series of binary pulses. The computer compares what it sent to the speaker with what it received back from the microphone, and by performing a cross-correlation operation on the 2 signals, it can calculate the speaker's impulse response. FFT techniques can then generate the speaker's frequency response, step response, cumulative spectral decay plot, etc, from the impulse response.

KBK's picture

I guess six samples is enough to drop the S/N ratio to an acceptable level for a quick plot and look-see at the horizontal dispersion in the midband/crossover-region and up.

Site Map / Direct Links