Pioneer SP-BS41-LR loudspeaker Specifications

Sidebar 1: Specifications

Description: Two-way, reflex-loaded, stand-mounted loudspeaker. Drive-units: 1" soft-dome tweeter, 5.25" woofer. Crossover frequency: 2.5kHz. Frequency range: 55Hz–20kHz. Nominal impedance: 6 ohms. Sensitivity: 85dB/2.83V/m. Maximum input power: 130W.
Dimensions: 7.9" (200mm) W by 13.75" (350mm) H by 8.7" (220mm) D. Weight: 10.25 lbs (4.7kg).
Finish: Black vinyl.
Serial Numbers Of Units Reviewed: JFNV00015BUC (both).
Price: $149.99/pair. Approximate number of dealers: >20 (a limited set of overall Pioneer dealers).
Manufacturer: Pioneer Electronics (USA) Inc., PO Box 1540, Long Beach, CA 90801-1540. Tel: (800) 421-1404. Web: www.pioneerelectronics.com.

COMPANY INFO
Pioneer Electronics (USA) Inc.
PO Box 1540
Long Beach, CA 90801-1540
(800) 421-1404
ARTICLE CONTENTS
Share | |
COMMENTS
Ovation123's picture

I have begun speaker shopping for a modest 2 channel setup (will be moving my current AVR to the living room and updating my HT with a new AVR) and, frankly, was considering speakers quite a bit more expensive than these Pioneers until I came across several references and reviews to them by reputable people. While I am not opposed to standmount speakers (I have 5 of them in my HT), I was considering exploring floorstanders. Given the glowing review of the standmounts here, I wonder (knowing full well they have not been reviewed) if it is a reasonable assumption to expect the FL51 versions of this speaker line to basically sound like the BS41s under review but with more low frequency extension. This line does not appear available at any local stores for me to give them even a casual listen, so any insight you might have would be appreciated.

Thank you.

GLADYS ZYBYSKO's picture

I cannot believe you didn't notice that there are NO high frequencies. None. And I tried two different sets of these speakers, which were identical.

Yeah, the midrange is nice. Yeah the bass is great. But there are no highs ... to the point of unpleasant notice-ability.

X
Enter your Stereophile.com username.
Enter the password that accompanies your username.
Loading