NHT 2.9 loudspeaker Specifications

Sidebar 1: Specifications

Description: Four-way, floorstanding, acoustic-suspension loudspeaker. Drive-units: 1" fluid-cooled aluminum-dome tweeter, 4" polypropylene-cone upper-midrange unit, 6.5" polypropylene-cone lower-midrange unit; 10" long-throw polypropylene-cone woofer. Crossover frequencies: 100Hz, 320Hz, 3.5kHz. Frequency response: 26Hz-26kHz, ±3dB. Sensitivity: 87dB/W/m. Impedance: 6 ohms nominal, 3.1 ohms minimum. Recommended amplifier power: 30-250Wpc.
Dimensions: 39.5" H by 7" W by 21.5" D. Weight: 78 lbs.
Finishes: gloss black; mahogany or sycamore, add $175/pair.
Serial numbers of units reviewed: none.
Price: $2500-$2675/pair depending on finish. Approximate number of dealers: 300.
Manufacturer: NHT Division of Recoton, 2950 Lake Emma Road, Lake Mary, FL 32746. Tel: (800) NHT-9993. Fax: (707) 747-1252. Web: www.nhthifi.com.

COMPANY INFO
NHT
2950 Lake Emma Road
Lake Mary, FL 32746
(800) NHT-9993
ARTICLE CONTENTS
Share | |
COMMENTS
DaveinSM's picture

I had a pair of these speakers once, and while they did sound good, could play very loudly, and had very good bass response, I noticed a very noticeable improvement in sound - at least in my system and my room- when I switched to Thiel's CS 2 2's.  But the Thiels could not match the NHT's dynamics, slam, or low bass response.  In fact, I could get the passive radiator/woofers to bottom out pretty easily with very low bass program material.  So I switched to CS3.6's, which sounded pretty similar to the CS 2 2's but with much better low bass response.  They need to be further away from walls and corners, however, or they sound bass heavy.  Even then, the CS 3.6's might not have the low bass slam and output capacity of the 2.9's.  Those speakers could really rock a house.

X
Enter your Stereophile.com username.
Enter the password that accompanies your username.
Loading