Major Changes for YG Acoustics

If you look closely at the easel to the right of the photo of the YG room at the Sands/Venetian Convention Center, you can see the text "with drivers machined in-house." Usually, this means that the manufacturer has machined the baskets and polepieces, but in the case of YG, they are also talking about the cones!

Called "BilletCore" by the Colorado company, the aluminum cone for the midrange and low-frequency drive-units used in the top-of-the-line Anat III Reference ($111,000/system) and the smaller three-way Kipod is milled from a solid block of aluminum. In the case of the Anat subwoofer, the starting point is a billet of aluminum 2.5" thick weighing 16 lbs, compared with the finished cone after a day of work, which is 0.008" thick and weighs less than 1 ounce. Stiffening ribs are left on the rear of the cone and the final step is to black-anodize the aluminum. The benefit of machining the cone is said to be improved unit-unit consistency and rigidity compared with a conventional spun, cast, or pressed metal diaphragm, which pushes break-up modes even farther out-of-band.

Though YG was in the same room as in previous CESes, they had taken heroic measures this year to tame its acoustics, as can be seen from the photo. The result was worth the effort. In a system that included dCS Scarlatti digital front-end, a Veloce battery-powered preamp, Tenor 350M monoblocks, and Kubala-Sosna Master Reference cables, the Anat II Reference produced a warm, detailed, full-range sound. Particularly impressive was a version of Sting's "Roxanne" from Italian singer Petra Magoni of Musica Nuda. Both the voice and the solo double bass accompaniment had a palpable presence but without sounding forced or exaggerated.

COMMENTS
Erick Lichte's picture
YG's showing at CES 2011 is best I've heard these speakers.
funkymas's picture

Hey JA,
Great Article. Just see a typo!

"Tenor 350M monoblocks, and Kubala-Sosna Master Reference cables, the Anat II Reference produced a warm, detailed, full-range sound. "

The Anat II should be Anat III like you mentioned earlier in the article!

Thanks :-)

lap's picture

Also, did you mean Kubala-Sosna Elation cables? Not aware of Master Reference cables by KS

X