You are here

Log in or register to post comments
FPL
FPL's picture
Offline
Last seen: Never ago
Joined: Jun 21 2007 - 6:00am
B&W 703 binding post

Hi Everyone!! this is the first time I post here, but have been following the forums for quite sometime now. I have learned a lot from old posts making a lot easier making decisions when buying gear!! I have just ordered a pair of B&W 703 and am about to order from a different dealer cables as well. However, since I don't live in the US, it can become very expensive If I order something wrong. I live in Brazil.
I'm buying Kimber cable and will be using WBT spades. I see that the spades model I decided to go for comes in two sizes: WBT0660 (6mm) and WBT0680 (8mm). So my question is simple: Does anyone know if the BW703 has a 6mm or 8mm biding post width??? I would be a huge mistake to buy something that does't fit!! I hv checked bw's website everywhere and can't find this spec. tks a lot in advance!!

59mga
59mga's picture
Offline
Last seen: 4 months 3 days ago
Joined: Jun 21 2006 - 6:52am
Re: B&W 703 binding post

The spec sheet may tell you this. If not, go to www.bower-wilkins.com and submit the question. They will be able to give you the answer. Keep us posted as to how things turn out.

59mga
59mga's picture
Offline
Last seen: 4 months 3 days ago
Joined: Jun 21 2006 - 6:52am
Re: B&W 703 binding post

Fabiano, that should have been www.bowers-wilkins.com Sorry about the typo.

FPL
FPL's picture
Offline
Last seen: Never ago
Joined: Jun 21 2007 - 6:00am
Re: B&W 703 binding post

Tks Mike!! Got the answer from the WBT customer service. It turns out to be 6mm. WBT makes the binding pot on the 700 and 800 series B&W.

  • X
    Enter your Stereophile.com username.
    Enter the password that accompanies your username.
    Loading