seandil
seandil's picture
Offline
Last seen: 12 years 6 months ago
Joined: Sep 11 2011 - 7:14pm
Speaker connectors: what to use and whether or not to solder and how?
jackfish
jackfish's picture
Offline
Last seen: 10 years 5 months ago
Joined: Dec 19 2005 - 2:42pm

bare naked wire will work just fine

unless you have really long runs, 10 gauge wire is really overkill

http://www.roger-russell.com/wire/wire.htm#wiretable

seandil
seandil's picture
Offline
Last seen: 12 years 6 months ago
Joined: Sep 11 2011 - 7:14pm

Thanks for letting me know,

  I do have runs that are long.  I googled this question and it said to use 10 gauge wire for distances involved.  I bought some nachimichi banana plugs before I read this forum.  What's confusing is that people say 'bare wire' corrodes, and should be 'tinned' with solder.  However; the solder is not as good a conductor as the bare wire, and reduces the conductivity of the wire.  Sort of a damned if you do, and damned if you don't kinda thing.  I'm going to use what I bought, but was just wondering how to seal it up to keep the 'bare wire' inside the plugs from corroding?  I think I will just use a silicone sealant? 

Anyone else feel free to comment please.

JohnnyR
JohnnyR's picture
Offline
Last seen: 10 years 7 months ago
Joined: Sep 10 2011 - 10:12am

You aren't going to notice any conductivity issues. It's much better to have a reliable tinned connection than have to keep taking a bare wire connection apart every few months to clean it up. Too much is made about solder when there are hundreds of soldered connections inside your preamp, amp , cd and dvd player to no end. The best connection is a soldered connection. Crossovers inside a speaker are soldered for best performance.

JoeE SP9
JoeE SP9's picture
Offline
Last seen: 1 week 3 days ago
Joined: Oct 31 2005 - 6:02pm

I had a 6' pair of DH Labs Q-10 Signature cables. I cut them in half and connected Kimber Postmaster spades to the cut ends. I used Radio Shack Silver bearing solder ($5.69 for a 4 Oz. roll) to tin the bare ends before crimping on the spade lugs. Radio Shack Silver bearing solder is a real bargain when compared to stuff like Wonder Solder.

roadster
roadster's picture
Offline
Last seen: 8 years 9 months ago
Joined: Apr 16 2008 - 4:51am

... with silver content solder for better conductivity is my recommendation. Use a high grade copper cable...the cheap stuff will discolor eventually and degrade connectivity. As recommended, above, there's no need for additional connectors...that's just another source of trouble. The fewer chains in the link the better. 

Log in or register to post comments
-->
  • X