GALLERIES

You are here

Home » Galleries » DIY Projects » The BETA version of the new crossovers

Well, the DIVA crossover was pretty ok compared to most others i have seen but still waaay below the standard of the DIVA. I use Mundorf Supreme Caps, Mundorf Supreme Foil only Spools and silver wire.

I did make new boxes, new layout and bought new connectors but i have no digital camera anymore. :-)

Average: 2.3 (6 votes)
TinyTim's picture
The BETA version of the new crossovers
TinyTim  |  May 2, 2006
Views:
Dimensions: 515x386
Size: 49kb
Filed Under: DIY Projects 
COMMENTS
John_Atkinson's picture
Submitted by John_Atkinson (not verified) on May 10, 2006 - 1:41pm

You might want to try orienting the inductors so that each coil axis is oriented at a right angle to the others.This will minimize mutual coupling.

Flo's picture
Submitted by Flo (not verified) on May 10, 2006 - 2:14pm

Thank you, as luck will have it i have done so in my latest edition and also changed the cabling so silver plated copper rails :-)

showflash's picture
Submitted by showflash (not verified) on April 9, 2007 - 10:14pm

Thats one beautiful crossover.

crazymf's picture
Submitted by crazymf (not verified) on August 25, 2008 - 12:46pm

after such an investment of work and money you will NEVER confirm that old crossover sounded better ;)

    • X