Freako
Freako's picture
Offline
Last seen: 2 years 11 months ago
Joined: Jan 17 2010 - 8:29am
DIY basstraps
Elk
Elk's picture
Offline
Last seen: 3 years 7 months ago
Joined: Dec 26 2006 - 6:32am


Quote:
It's more dry in a way, like the majority of the pressure waves are less noticeable.

It appears as you are making good progress.

Freako
Freako's picture
Offline
Last seen: 2 years 11 months ago
Joined: Jan 17 2010 - 8:29am

Thanks, that's what we all aim for, right?

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am

A peculiarity of bass traps is they can actually hurt the sound when placed in the corner of the room. All depends on the actual location of the energy peak you're attempting to absorb. The peaks don't necessarily set up in the corner - shocking, I know. Every room is different and every speaker has it's own radiation pattern. The optimum location for each trap could be a foot or two away from the corner. Hard to say for sure without a sound pressure level meter.

Cheerio

Elk
Elk's picture
Offline
Last seen: 3 years 7 months ago
Joined: Dec 26 2006 - 6:32am

Every small untreated room exhibits excess bass. Trihedral corner reflections are always the strongest. The corner is the best placement, either on the floor or toward the ceiling.

You are never going to hurt the sound by absorbing some of the excess bass.

It is true however that if there is a specific peak you want to attack, you need to make adjustments for this specific frequency - but this isn't going to be his issue.

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:
Every small untreated room exhibits excess bass. Trihedral corner reflections are always the strongest. The corner is the best placement, either on the floor or toward the ceiling.

You are never going to hurt the sound by absorbing some of the excess bass.

It is true however that if there is a specific peak you want to attack, you need to make adjustments for this specific frequency - but this isn't going to be his issue.

Maybe time to pull out the old Radio Shack SPL meter and see where those squirrely low frequency standing waves really are.

Cheers

Elk
Elk's picture
Offline
Last seen: 3 years 7 months ago
Joined: Dec 26 2006 - 6:32am

Knock yourself out.

Remember to take lots of measurements in many positions, and at different frequencies.

Or rely on the many published works on acoustics already out there.

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:
Knock yourself out.

Remember to take lots of measurements in many positions, and at different frequencies.

Or rely on the many published works on acoustics already out there.

Thanks for all the tips anyway, but I've been doing this measuring of room acoustics thing for years. It's like, you know, part of my J-O-B description.

I have a pronounced tendency not to rely on published works on acoustics, if you want to know the truth. Is that wrong?

Freako
Freako's picture
Offline
Last seen: 2 years 11 months ago
Joined: Jan 17 2010 - 8:29am

The problem isn't as much a peak as it is an overshoot of bass, best heard close to the back wall, and in all 4 corners. The closer to the floor, the more excess bass. I don't really know what to call it, but that is what I am working on.

Actually I have placed some old speakers in the 2 corners opposite from the speakers, in order to help the "bass traps", and it seems to work, but only takes away some of the excess bass.

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:
The problem isn't as much a peak as it is an overshoot of bass, best heard close to the back wall, and in all 4 corners. The closer to the floor, the more excess bass. I don't really know what to call it, but that is what I am working on.

Actually I have placed some old speakers in the 2 corners opposite from the speakers, in order to help the "bass traps", and it seems to work, but only takes away some of the excess bass.

You rock, good buddy! Now, we've got to work on what in the heck to do about the excess higher frequencies in the upper corners of the room, at the ceiling.

Cheerio

Elk
Elk's picture
Offline
Last seen: 3 years 7 months ago
Joined: Dec 26 2006 - 6:32am


Quote:
Thanks for all the tips anyway, but I've been doing this measuring of room acoustics thing for years.

Excellent.

Then tell us specifically what you have found to be the case as it relates to the behavior of low frequency sound waves (less than 150 hz or so) in the typical small listening room.

I have not seen anyone dispute that bass builds in the boundaries, particularly the corners - but if you have different specific knowledge please share.

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:

Quote:
Thanks for all the tips anyway, but I've been doing this measuring of room acoustics thing for years.

Excellent.

Then tell us specifically what you have found to be the case as it relates to the behavior of low frequency sound waves (less than 150 hz or so) in the typical small listening room.

I have not seen anyone dispute that bass builds in the boundaries, particularly the corners - but if you have different specific knowledge please share.

I'm pretty sure I already answered your question. But to be a little more specific, the low frequency standing waves and reflected waves can located in the 3-D space of the room, including boundaries, with an SPL meter and test tone of the frequency under investigation.

Cheers

Elk
Elk's picture
Offline
Last seen: 3 years 7 months ago
Joined: Dec 26 2006 - 6:32am


Quote:
But to be a little more specific, the low frequency standing waves and reflected waves can located in the 3-D space of the room, including boundaries, with an SPL meter and test tone of the frequency under investigation.

Of course, standing waves in many places throughout the room depending on its dimensions and frequency. All of this can be mathematically predicted, much easier than pulling out a mic and plotting software.

But this isn't the issue.

I pointed out "Every small untreated room exhibits excess bass. Trihedral corner reflections are always the strongest." "You are never going to hurt the sound by absorbing some of the excess bass."

You suggested pulling out an SPL meter "and see where those squirrely low frequency standing waves really are."

Yes, an individual frequency will have a standing wave somewhere in the room with the number of such locations increasing as the wavelength decreases.

But on point:

Do you dispute that bass builds in the boundaries, particularly the corners?

Do you dispute that bass builds most strongly in trihedral corners?

Do you dispute that a broadband bass absorber is most effective in such corners?

What Keld did was exactly correct. He describes broadband excess bass. By absorbing the bass where it is strongest he effectively decreases standing waves elsewhere in the room - always a good thing.

Of course, if he possess a completely unique room which exhibits standing waves at only one frequency he may simply want to move his listening chair a tad.

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:

Do you dispute that bass builds in the boundaries, particularly the corners?

Do you dispute that bass builds most strongly in trihedral corners?

Do you dispute that a broadband bass absorber is most effective in such corners?

Yes, I dispute all of the points above as being too simplistic or just plain incorrect.

Without an SPL meter and good selection of test tones, one will only get an approximation.

But probably good enough for Government work.

Cheers

Freako
Freako's picture
Offline
Last seen: 2 years 11 months ago
Joined: Jan 17 2010 - 8:29am


Quote:

Quote:
But to be a little more specific, the low frequency standing waves and reflected waves can located in the 3-D space of the room, including boundaries, with an SPL meter and test tone of the frequency under investigation.

Of course, standing waves in many places throughout the room depending on its dimensions and frequency. All of this can be mathematically predicted, much easier than pulling out a mic and plotting software.

But this isn't the issue.

I pointed out "Every small untreated room exhibits excess bass. Trihedral corner reflections are always the strongest." "You are never going to hurt the sound by absorbing some of the excess bass."

You suggested pulling out an SPL meter "and see where those squirrely low frequency standing waves really are."

Yes, an individual frequency will have a standing wave somewhere in the room with the number of such locations increasing as the wavelength decreases.

But on point:

Do you dispute that bass builds in the boundaries, particularly the corners?

Do you dispute that bass builds most strongly in trihedral corners?

Do you dispute that a broadband bass absorber is most effective in such corners?

What Keld did was exactly correct. He describes broadband excess bass. By absorbing the bass where it is strongest he effectively decreases standing waves elsewhere in the room - always a good thing.

Of course, if he possess a completely unique room which exhibits standing waves at only one frequency he may simply want to move his listening chair a tad.

Not wanting to elevate my skills or anything, but it's rather easy to hear that there is less standing waves after making the "bass traps". Actually I believe that what I am doing here, is a "rough" taming, and Geoff is talking of a more specific, and perhaps more defined taming of a narrower band of bass waves. Feel free to correct me if I am wrong.

Right behind my listening chair (I have moved it a bit forward) there's a clearly audible collision of bass waves. Anybody in their right mind can hear that. Moving my chair a bit forward corresponds to the rule of thirds, which makes listening much more pleasurable. Sadly I cannot move my speakers 1/3 into the room. As it is, I believe you're both right, but perhaps you're talking of two different levels of bass taming?

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:
Right behind my listening chair (I have moved it a bit forward) there's a clearly audible collision of bass waves. Anybody in their right mind can hear that.

Eggs-actly! The location of standing waves - of any frequency - in the room is not predictable, and certainly not relegated to room corners, so in order to locate them all, a procedure is required that will find ALL of them and their exact locations.

I am not limiting my comments to bass frequencies, as all frequencies are important and should be dealt with.

When you assume something, you make an ass out of me and Uma Thurman. - old audiophile expression

Freako
Freako's picture
Offline
Last seen: 2 years 11 months ago
Joined: Jan 17 2010 - 8:29am

Sure thing, but in fact I intended to work on the excess bass I heard 1) in the corners and 2) close to the wall behind the speakers plus the opposite wall. At some point it became clear to me that the corner build-up and the wave collision points are both products of the same properties in bass waves. High energy, long waves and omnidirectional spreading. But it seems obvious to me that you cannot fight the corner bass build-up using a meter to locate standing wave collision, and working on those from the beginning. I believe it's the other way round: Work on taming the corner build-up, and you'll eventually get rid of the standing waves colliding like they do right behind my listening position.

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:
I believe it's the other way round: Work on taming the corner build-up, and you'll eventually get rid of the standing waves colliding like they do right behind my listening position.

Hope springs eternal in the human breast.

An ordinary man has no means of deliverance.

Freako
Freako's picture
Offline
Last seen: 2 years 11 months ago
Joined: Jan 17 2010 - 8:29am

Not a bad place to start

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:
Not a bad place to start

You will have more in the end if you have more when you start out. - Law of Optimization

Thimk ahead.

Elk
Elk's picture
Offline
Last seen: 3 years 7 months ago
Joined: Dec 26 2006 - 6:32am


Quote:

Quote:
Do you dispute that bass builds in the boundaries, particularly the corners?

Do you dispute that bass builds most strongly in trihedral corners?

Do you dispute that a broadband bass absorber is most effective in such corners?

Yes, I dispute all of the points above as being too simplistic or just plain incorrect.

One doesn't treat standing waves, one eliminates their cause (interference reflections). The best way to accomplish this is to absorb the bass frequencies where they congregate; that is trihedral corners, with two surface corners the next best.

(Think wiping out the ant nest instead of squishing each individual ant on the floor where it happens to appear.)

Once again, what is incorrect with this approach?

What is too simplistic?

What is the specific better alternative?

We can handle the complex. Explain precisely what Keld should do and why this will work. Go for it! Share your knowledge!

(Keld, I assume you have already tried various seating positions and speaker placement to minimize your existing acoustic issues. If not, this is the place to start.)

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:

Quote:

Quote:
Do you dispute that bass builds in the boundaries, particularly the corners?

Do you dispute that bass builds most strongly in trihedral corners?

Do you dispute that a broadband bass absorber is most effective in such corners?

Yes, I dispute all of the points above as being too simplistic or just plain incorrect.

One doesn't treat standing waves, one eliminates their cause (interference reflections). The best way to accomplish this is to absorb the bass frequencies where they congregate; that is trihedral corners, with two surface corners the next best.

(Think wiping out the ant nest instead of squishing each individual ant on the floor where it happens to appear.)

Once again, what is incorrect with this approach?

What is too simplistic?

What is the specific better alternative?

We can handle the complex. Explain precisely what Keld should do and why this will work. Go for it! Share your knowledge!

(Keld, I assume you have already tried various seating positions and speaker placement to minimize your existing acoustic issues. If not, this is the place to start.)

Geez, and I thought Scott was argumentative.

What is it about my explanation that you don't understand? I'm not so sure "you" can "handle the complex," as you put it. And I'm not about to try and change the mind of anyone who has already made it up.

I'm not trying to set the world on fire, just trying to start a flame in a few hearts.

Buddha
Buddha's picture
Offline
Last seen: 12 years 5 months ago
Joined: Sep 8 2005 - 10:24am

Interestingly, with the rolled-up foam method you have actually created a variable density device, with the center being more compacted than at outer edges.

That can actually have different sonic effect than, say, a roll of insulation that is not compressed in the center.

Keld, you could also experiment with rolling your foam more or less tightly, perhaps even using a shorter length of foam and trying to make a non-compressed bass trap.

Sorry to interupt the pissing match!

Carry on.

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:
Interestingly, with the rolled-up foam method you have actually created a variable density device, with the center being more compacted than at outer edges.

That can actually have different sonic effect than, say, a roll of insulation that is not compressed in the center.

Keld, you could also experiment with rolling your foam more or less tightly, perhaps even using a shorter length of foam and trying to make a non-compressed bass trap.

Sorry to interupt the pissing match!

Carry on.

What are you going on about, now? "Variable density device."

"Oh yes, I'm the great pretender..."

Buddha
Buddha's picture
Offline
Last seen: 12 years 5 months ago
Joined: Sep 8 2005 - 10:24am

You'll figure it out.

Or are you just upset your bitch-fest was interrupted?

You give yourself too much credit, you're a lousy pretender.

Freako
Freako's picture
Offline
Last seen: 2 years 11 months ago
Joined: Jan 17 2010 - 8:29am


Quote:
Interestingly, with the rolled-up foam method you have actually created a variable density device, with the center being more compacted than at outer edges.

That can actually have different sonic effect than, say, a roll of insulation that is not compressed in the center.

Keld, you could also experiment with rolling your foam more or less tightly, perhaps even using a shorter length of foam and trying to make a non-compressed bass trap.

Sorry to interupt the pissing match!

Carry on.

Sure, but where would I put them? Even for the small size they have, I had to squeeze them into the corners.

I was trying to attack the problem on as low a frequenzy level as possible, why I rolled the material firmly, and added membranes. I believe a looser rolled up bass trap works less in the deep bass, and more in a higher area where I really don't wanna mess too much with the sound. Besides, the density of the foam is rather low. Useless as a flat(-ter) bass absorbant, which a lesser compact matress would act like. It's about transforming bass energy into heat after all, and I would rather not cut my "guest beds" to pieces

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am

I imagine your record collection is converting a lot of bass energy to heat, eh?

Freako
Freako's picture
Offline
Last seen: 2 years 11 months ago
Joined: Jan 17 2010 - 8:29am

Seriously? I don't think so.

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:
Seriously? I don't think so.

Would I kid you? I don't think so.

Freako
Freako's picture
Offline
Last seen: 2 years 11 months ago
Joined: Jan 17 2010 - 8:29am

I don't know if you would, but you may be right now that I think about it.

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:
I don't know if you would, but you may be right now that I think about it.

It'll be our little secret.

I wasn't going to bring this up, but are the three large acoustic resonators you have on the wall behind the speakers by design?

Freako
Freako's picture
Offline
Last seen: 2 years 11 months ago
Joined: Jan 17 2010 - 8:29am


Quote:

Quote:
I don't know if you would, but you may be right now that I think about it.

It'll be our little secret.

I wasn't going to bring this up, but are the three large acoustic resonators you have on the wall behind the speakers by design?

Lol Geoff...

You mean the CD shelves? Yes, but not by me. Some European company made them, but sadly they are no longer manufactured. The name is Dacapo. I liked them because you were supposed to be able to keep on adding shelves.

rvance
rvance's picture
Offline
Last seen: 10 years 7 months ago
Joined: Sep 8 2007 - 9:58am

I like the Fedora Tweak on each of your speakers.

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:
You mean the CD shelves?

Actually, I was referring to the CDs themselves, if you catch my drift.

ncdrawl
ncdrawl's picture
Offline
Last seen: 12 years 11 months ago
Joined: Oct 18 2008 - 9:18am

yes, the acoustics work from those hacks Everest, Blackstock, Toole, Geddes, John Sayers, Blumlein, and others..all part of a conspiracy whose goal is to rob home listeners of their *sound*

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:
yes, the acoustics work from those hacks Everest, Blackstock, Toole, Geddes, John Sayers, Blumlein, and others..all part of a conspiracy whose goal is to rob home listeners of their *sound*

No smiley face?

You've been through all of F. Scott Fitzgerald's books
You're very well read, it's well known
But something is happening here and you don't know what it is
do you, Mr. Jones?

~ Cheerio

Freako
Freako's picture
Offline
Last seen: 2 years 11 months ago
Joined: Jan 17 2010 - 8:29am


Quote:
I like the Fedora Tweak on each of your speakers.

Hehe, from a recommendation from Buddha there's 13 lbs of metal under each "fedora". Just so you're careful when putting one of them on your head

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:

Quote:
I like the Fedora Tweak on each of your speakers.

Hehe, from a recommendation from Buddha there's 13 lbs of metal under each "fedora". Just so you're careful when putting one of them on your head

Did it occur to you there's the distinct possibility you're following the wrong sheep?

RGibran
RGibran's picture
Offline
Last seen: 2 years 4 months ago
Joined: Oct 11 2005 - 5:50pm

DIY ASSHATS???

Wow Geoff!

Maybe you could try begging for customers next?

Buddha
Buddha's picture
Offline
Last seen: 12 years 5 months ago
Joined: Sep 8 2005 - 10:24am


Quote:
DIY ASSHATS???

Wow Geoff!

Maybe you could try begging for customers next?

Geoffie has been working through alot of anger issues lately.

He even forget to ask the IQ of the clock on Keld's wall above the turntable or the other room improvement devices that are more up Geoff's tube of joy.

Looks like Keld has a....

Talented Timepiece

Perspicacious Pyrometer

Holistic Hygrometer

In Geoffie's world, he just missed several thousand dollars in revenue that seems to have gone into Ikea's pocket. Of couse he's pissed off!

Even more telling, Keld saying he heard a difference makes no difference to Geoffie, either. Completely beside the point. Just makes him wanna shake his tiny fist in rage!

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:

Quote:
DIY ASSHATS???

Wow Geoff!

Maybe you could try begging for customers next?

Geoffie has been working through alot of anger issues lately.

He even forget to ask the IQ of the clock on Keld's wall above the turntable or the other room improvement devices that are more up Geoff's tube of joy.

Looks like Keld has a....

Talented Timepiece

Perspicacious Pyrometer

Holistic Hygrometer

In Geoffie's world, he just missed several thousand dollars in revenue that seems to have gone into Ikea's pocket. Of couse he's pissed off!

Even more telling, Keld saying he heard a difference makes no difference to Geoffie, either. Completely beside the point. Just makes him wanna shake his tiny fist in rage!

Buddha
Buddha's picture
Offline
Last seen: 12 years 5 months ago
Joined: Sep 8 2005 - 10:24am

Boy, Geoffie, we can't even have a discussion with Keld about his room tweaks without you turning into a bitch.

I think you should get yourself a Hi Fi and cheer up.

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:
Boy, Geoffie, we can't even have a discussion with Keld about his room tweaks without you turning into a bitch.

I think you should get yourself a Hi Fi and cheer up.

Geez, you'd think your Machina Dynamica hard on would go down eventually. You always said it was psychological.

Buddha
Buddha's picture
Offline
Last seen: 12 years 5 months ago
Joined: Sep 8 2005 - 10:24am


Quote:

Quote:
Boy, Geoffie, we can't even have a discussion with Keld about his room tweaks without you turning into a bitch.

I think you should get yourself a Hi Fi and cheer up.

Geez, you'd think your Machina Dynamica hard on would go down eventually. You always said it was psychological.

Psychological, at this point, as in you have some psychological issues.

You get pretty riled up with Keld talking about damping, don't you?

Maybe you can go try to wreck a discussion in the classical music forum....you can opine about the lack of coverage you've been getting there.

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:

Quote:

Quote:
Boy, Geoffie, we can't even have a discussion with Keld about his room tweaks without you turning into a bitch.

I think you should get yourself a Hi Fi and cheer up.

Geez, you'd think your Machina Dynamica hard on would go down eventually. You always said it was psychological.

Psychological, at this point, as in you have some psychological issues.

You get pretty riled up with Keld talking about damping, don't you?

Maybe you can go try to wreck a discussion in the classical music forum....you can opine about the lack of coverage you've been getting there.

Can I prescribe a little Vivaldi and a nice cold shower for you?

ncdrawl
ncdrawl's picture
Offline
Last seen: 12 years 11 months ago
Joined: Oct 18 2008 - 9:18am

at least he is in the performance art career sector rather than aerospace design.

Clever Little Vertical Stabilizer?

Nimbus Aileron?

the new Intelligent Orbiter?

at least in performance art his work is not a liability.

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:
at least he is in the performance art career sector rather than aerospace design.

Clever Little Vertical Stabilizer?

Nimbus Aileron?

the new Intelligent Orbiter?

at least in performance art his work is not a liability.

I'll handle the jokes around here, you sick little monkey.

Freako
Freako's picture
Offline
Last seen: 2 years 11 months ago
Joined: Jan 17 2010 - 8:29am


Quote:

Quote:

Quote:
I like the Fedora Tweak on each of your speakers.

Hehe, from a recommendation from Buddha there's 13 lbs of metal under each "fedora". Just so you're careful when putting one of them on your head

Did it occur to you there's the distinct possibility you're following the wrong sheep?

Actually I would rather have kept this to myself, but now that you got it out in the open: Baaah!

rvance
rvance's picture
Offline
Last seen: 10 years 7 months ago
Joined: Sep 8 2007 - 9:58am

Keld, You are a charming and generous person. An asset to the forum. When joking and insults are directed your way, you usually disarm your antagonist by taking the high road instead of freaking out. What a guy!

geoffkait
geoffkait's picture
Offline
Last seen: 3 months 1 week ago
Joined: Apr 29 2008 - 5:10am


Quote:
Keld, You are a charming and generous person. An asset to the forum. When joking and insults are directed your way, you usually disarm your antagonist by taking the high road instead of freaking out. What a guy!

So, all of a sudden I'm the bad guy for trying to get the level of the discussion a little higher than Novice? Well, that's just great!

rvance
rvance's picture
Offline
Last seen: 10 years 7 months ago
Joined: Sep 8 2007 - 9:58am


Quote:

Quote:
Keld, You are a charming and generous person. An asset to the forum. When joking and insults are directed your way, you usually disarm your antagonist by taking the high road instead of freaking out. What a guy!

So, all of a sudden I'm the bad guy for trying to get the level of the discussion a little higher than Novice? Well, that's just great!

You and KBK have to grab us by the scruff of our novice necks and drag us to the higher truth. Even if it involves pictures of goats. It's a dirty job...

Pages

Log in or register to post comments
-->
  • X