ncdrawl
ncdrawl's picture
Offline
Last seen: 12 years 11 months ago
Joined: Oct 18 2008 - 9:18am
Richard Gray Power Conditioning Products.. a revelation.
Elk
Elk's picture
Offline
Last seen: 3 years 7 months ago
Joined: Dec 26 2006 - 6:32am

Now that the shouting has died down . . .

I have always had trouble with the design of these products as the run in parallel to the power, not in series. This may be my lack of understanding of the specifics of circuit design, but it seems to me that the power yuck would just keep going along to the unit being powered, especially if the cleaning circuit had a higher impedance.

I have a PS Audio Power Plant Premier and find the power regeneration lowers the noise floor and adds clarity when used on mic pres and ADCs.

On what equipment does the RPG product work the best?

ncdrawl
ncdrawl's picture
Offline
Last seen: 12 years 11 months ago
Joined: Oct 18 2008 - 9:18am

Hey Elk.. well, I noticed a marked improvement on all my gear, but the SoundCraft Ghost was definitely the most obvious, Maybe because the design isnt as well thought out as some of my other gear? I have an old Fostex multitrack machine for which the RGP produced a right stunning result too.. but they definitely improved every situation I put it in..I will post some files later this week.

My mic pres(24 channels of DAV with Mytek Conversion primary kit) are dead silent, so effects are not noticed as much there, although I do have a pair of m221 schoeps that I havent used em with..hmm

Welshsox
Welshsox's picture
Offline
Last seen: 12 years 3 months ago
Joined: Dec 13 2006 - 7:27pm

Hi

Im with Elk on this one, I dont understand how a parallel device can seriously improve the mains power.

It addition to this, one thing that has really struck me as odd. Why isint high quality audio designed to run off DC voltages ? and then you could have batteries which have zero noise and a totally pure supply ?

If you are going to use AC then in the industrial world you need a large Constant Voltage Transformer inconjunction with other components to reduce AC noise below a 3% distortion.

I just cant get over the snake oil looking nature of these power conditioners, why are they only used in Hifi and not in any other power sensitive industry ?

Alan

ncdrawl
ncdrawl's picture
Offline
Last seen: 12 years 11 months ago
Joined: Oct 18 2008 - 9:18am

I find it odd that the same person that chided me in the 200,000 speaker thread is now shooting off about a power conditioner... not exotic enough for you?

you have the literature, feel free to contact richard gray directly..

Buddha
Buddha's picture
Offline
Last seen: 12 years 5 months ago
Joined: Sep 8 2005 - 10:24am

Pardon me if this is a dumb question, but do fuses also run in parallel with a circuit?

I ask because sonic claims are made for them, as well.

I've been trying to look around for an article about parallel power conditioning but can't find anything that 'splains it for me.

In your house, wouldn't all the devices plugged into the same circuit be running in parallel?

Is the example of the fridge making noise in your Hi FI rig and example of something running in parallel having an effect on an audio circuit?

Welshsox
Welshsox's picture
Offline
Last seen: 12 years 3 months ago
Joined: Dec 13 2006 - 7:27pm

NC

Sorry, i thought it was a reasonable constructive post asking a valid technical question.

Ill stop participating in your posts if contradiction of your opinion is not allowed

Alan

Welshsox
Welshsox's picture
Offline
Last seen: 12 years 3 months ago
Joined: Dec 13 2006 - 7:27pm

Buddha

There is no such thing as a parallel fuse in domestic electric supplys.

You are correct in that everything that is in a house is effectively on a single supply, people can run dedicated audio breakers but they are still combined at a fuse panel and noise from your fridge can indeed get everywhere.

From twenty years expereince with delicate electronics on oil rigs, ships, chemical plants the only way to truly provide clean power is via an inline power conditioner. These are very expenisve to make, you can buy a 2000VA UPS at Best buy for like $299, a real inline one of the type id use for real protection would cost $5000 !!

Alan

rvance
rvance's picture
Offline
Last seen: 10 years 7 months ago
Joined: Sep 8 2007 - 9:58am


Quote:
It addition to this, one thing that has really struck me as odd. Why isint high quality audio designed to run off DC voltages ? and then you could have batteries which have zero noise and a totally pure supply ?

Alan

Dup can't hammer me hear, so I'll bring up Mapleshade again just to be spiteful. Pierre Sprey designs and uses his own battery powered recording equip't. to eliminate ac noise- but you probably all know that. I've also seen some battery powered preamps. I'll bet some people can hear the batteries draining and don't like them!

Anyway, I'll go way out on a limb and bet the main problems are power and the expense of replacing batt's.

Welshsox
Welshsox's picture
Offline
Last seen: 12 years 3 months ago
Joined: Dec 13 2006 - 7:27pm

Why not just have a battery charger ?

You could trickle charge the batterys when not in use ?

This is exactly the same method used for the high power tornado sirens you see everywhere. They use approx 100 amps @ 24 VDC but they charge @ 5 amps !!

Alan

rvance
rvance's picture
Offline
Last seen: 10 years 7 months ago
Joined: Sep 8 2007 - 9:58am


Quote:
I find it odd that the same person that chided me in the 200,000 speaker thread is now shooting off about a power conditioner... not exotic enough for you?

you have the literature, feel free to contact richard gray directly..

Well, it's like this. Sometimes the True Scientist skeptics join in the forum and tell the plebes that they are all deluded by pitchmen, scam artists and the high-dollar snobbery promoted by the shills in their favorite magazine. Arguments and insults ensue. Then they want to share their own perfectly reasonable hero worship/audio epiphany while whipping a little common sense on the rabble. Bandwagon doesn't fill up so quickly.

Respect and consideration go a long way.

BTW, Just got caught up in the Rants and Rants section. You handled that nicely, moving to here and all. But Welsh is not a Dupster...not by a long shot.

rvance
rvance's picture
Offline
Last seen: 10 years 7 months ago
Joined: Sep 8 2007 - 9:58am


Quote:
Why not just have a battery charger ?

You could trickle charge the batterys when not in use ?

This is exactly the same method used for the high power tornado sirens you see everywhere. They use approx 100 amps @ 24 VDC but they charge @ 5 amps !!

Alan

I am not qualified to answer this question. But that never stops me from trying

Welshsox
Welshsox's picture
Offline
Last seen: 12 years 3 months ago
Joined: Dec 13 2006 - 7:27pm

Hi

My position is simple, it doesnt matter if a product costs $2 or $2,000,000.

There are things to be admired and things to be cynical about. I dont really know what the big deal is about cost.

After all if someone offered you Manhattan island now for a billion dollars ? would you not think it a bargin ?

Its all relative, the trick is to see through the smoke to the real value of items regardless of their absolute cost. Therefore a $2400 power conditioner can be a lot worse value than a $200,000 pair of speakers.

Alan

Elk
Elk's picture
Offline
Last seen: 3 years 7 months ago
Joined: Dec 26 2006 - 6:32am


Quote:
Why not just have a battery charger ?

You could trickle charge the batterys when not in use ?


Red Wine Audio modifies a number of products to do just this.

Elk
Elk's picture
Offline
Last seen: 3 years 7 months ago
Joined: Dec 26 2006 - 6:32am

ncdrawl,

I find the biggest difference with mic pres when using ribbon mics, probably because I am always wishing for more gain.

PS: You are pretty safe once you get away from DUP. The rest may ask some pointed questions but are truly interested.

Elk
Elk's picture
Offline
Last seen: 3 years 7 months ago
Joined: Dec 26 2006 - 6:32am


Quote:
I just cant get over the snake oil looking nature of these power conditioners, why are they only used in Hifi and not in any other power sensitive industry ?


A fair question.

My guess is that once the power is "good enough" in other applications there is no reason to ask for more.

In audio, there is no such things as "good enough". If it can be made better, someone will do so. There isn't the practical real-world yuck/buck type issues.

Cheap UPS power supplies are something else entirely. The inexpensive ($300.00) once have step-approximated sine wave generators. They sine wave is a mess, but will run your computer PSU fine for 10 minutes while you shut down.

I have never had the guts to plug good audio equipment into one after seeing what the power looks like on an oscilloscope.

A true sine wave costs a lot more. This doesn't give you better power supply protection, but it does provide better sound.

ncdrawl
ncdrawl's picture
Offline
Last seen: 12 years 11 months ago
Joined: Oct 18 2008 - 9:18am

I have a number of ribbons myself, my favorites being my coles 4040s. Ive done the whole testing thousands of pro audio products dance too.. I started out with Millennia and DACS amps, gordon, and others before moving to DAV and Pendulum permanently.. that combo is simply amazing. Mick Hinton is a genius(he designs dav stuff but worked at DECCA 30 years in the design dept before going solo)

plenty of snake oil in pro audio too, as youve seen..

JasonVSerinus
JasonVSerinus's picture
Offline
Last seen: 10 years 9 months ago
Joined: Apr 10 2006 - 11:22am

Years and years ago, when the Richard Gray company first began manufacturing devices, several reviewers at http://www.hometheaterhifi.com were passing one of them around. This happened after the writer who had requested the product for review had failed to hear any noticeable improvement, and asked other reviewers for their feedback.

The device at the time was one for which the claim was made that the more you put in the circuit, the greater the improvement. Some people were using four or more in sequence.

When I received the device, I too failed to hear an improvement. That, of course, may have been due to my reference system at the time, which has since improved in every respect. I eventually returned the product to the initial reviewer.

When it came time to write the review, the writer reported back to us that his agreement with the Richard Gray Power Company was that he could only review the product if the review was favorable. He thus sent the unit back without writing a review. My reaction was to question why he had ever agreed to such terms in the first place. I would never accept a product for review under such conditions.

I have no idea how the latest Richard Gray products might affect the sound of my current system. Nor do I have any reason to question the initial post in this thread. I simply know that, after my experience years ago, I have always given the company a wide berth.

ncdrawl
ncdrawl's picture
Offline
Last seen: 12 years 11 months ago
Joined: Oct 18 2008 - 9:18am

what power products do you use at home?

Quote:
Years and years ago, when the Richard Gray company first began manufacturing devices, several reviewers at http://www.hometheaterhifi.com were passing one of them around. This happened after the writer who had requested the product for review had failed to hear any noticeable improvement, and asked other reviewers for their feedback.

The device at the time was one for which the claim was made that the more you put in the circuit, the greater the improvement. Some people were using four or more in sequence.

When I received the device, I too failed to hear an improvement. That, of course, may have been due to my reference system at the time, which has since improved in every respect. I eventually returned the product to the initial reviewer.

When it came time to write the review, the writer reported back to us that his agreement with the Richard Gray Power Company was that he could only review the product if the review was favorable. He thus sent the unit back without writing a review. My reaction was to question why he had ever agreed to such terms in the first place. I would never accept a product for review under such conditions.

I have no idea how the latest Richard Gray products might affect the sound of my current system. Nor do I have any reason to question the initial post in this thread. I simply know that, after my experience years ago, I have always given the company a wide berth.

ethanwiner
ethanwiner's picture
Offline
Last seen: Never ago
Joined: Sep 1 2005 - 2:26pm


Quote:
You are pretty safe once you get away from DUP. The rest may ask some pointed questions but are truly interested.


I'm truly interested, but mainly interested in the psychology of belief systems and why people sometimes think they hear stuff that can't possibly exist. Since so many people don't want to hear that viewpoint I (try to) refrain from posting in threads such as this. But now we have four people (including DUP in absentia) all saying power conditioners cannot and do not improve the sound of audio. Yet the OP insists "at 2400 bucks for my home and studio.. it was a steal. wiped the floor with everything else ive used."

Go figure.

--Ethan

ncdrawl
ncdrawl's picture
Offline
Last seen: 12 years 11 months ago
Joined: Oct 18 2008 - 9:18am

Ethan, as Ive stated, the main difference was in the soundcraft ghost room... and that experience is easily repeated.

and yes, buying 4 units for 2400 bucks is, to me, a bargain. Look at Shunyata or some of those companies.. multiple thousands of bucks for a product that ive paid 600 per for

I dont think Serenius was saying that conditioners dont do anything for audio.. he was saying that the model I have didnt produce results for him.

I firmly believe that my Gefell mk221/josephson c617s decimate my DPA 4006s. Can that be true?

ncdrawl
ncdrawl's picture
Offline
Last seen: 12 years 11 months ago
Joined: Oct 18 2008 - 9:18am

who dismissed power conditioners as a whole?
I had not, prior to owning rgpc products had never heard any difference with power products. Ive used Shunyata, PS Audio, Furman, Exeltech, and many other brands both exotic and cheap. This time, though.. it was a night and day difference. Id bet my life on the fact that you could come in and hear the same thing. Id bet anything that I own.


Quote:

Quote:
You are pretty safe once you get away from DUP. The rest may ask some pointed questions but are truly interested.


I'm truly interested, but mainly interested in the psychology of belief systems and why people sometimes think they hear stuff that can't possibly exist. Since so many people don't want to hear that viewpoint I (try to) refrain from posting in threads such as this. But now we have four people (including DUP in absentia) all saying power conditioners cannot and do not improve the sound of audio. Yet the OP insists "at 2400 bucks for my home and studio.. it was a steal. wiped the floor with everything else ive used."

Go figure.

--Ethan

JasonVSerinus
JasonVSerinus's picture
Offline
Last seen: 10 years 9 months ago
Joined: Apr 10 2006 - 11:22am


Quote:
what power products do you use at home?
Quote:

Hi. I just want to explain that I don't have time for a back and forth amidst multiple deadlines. I am not questioning your assessment. I am just noting my experience with a product this company produced many years ago.

You can find my review of my reference Nordost Thor (equipped with an audiophile-grade fuse) in the archives of hometheaterhifi.com. I have also submitted a review of Electric Bamboo's power product, and expect it will be posted sometime before hell freezes over. I also have two PS Audio Power Plant Premiers here for review.

jason

ncdrawl
ncdrawl's picture
Offline
Last seen: 12 years 11 months ago
Joined: Oct 18 2008 - 9:18am

That thor review tells me everything I need to know, Mr. Serenius. at 3,300 and 2,100.00 vs 600 dollars, id expect that the review of those just had to be favorable..... they told me everything I could possibly want to know..

Thanks. (btw, I wasnt asking for a back and forth, just wanted to know the one thing)

the ps audio is a cheaper product, I believe.. id bet that by default it will get lower marks....


Quote:

Quote:
what power products do you use at home?
Quote:

Hi. I just want to explain that I don't have time for a back and forth amidst multiple deadlines. I am not questioning your assessment. I am just noting my experience with a product this company produced many years ago.

You can find my review of my reference Nordost Thor (equipped with an audiophile-grade fuse) in the archives of hometheaterhifi.com. I have also submitted a review of Electric Bamboo's power product, and expect it will be posted sometime before hell freezes over. I also have two PS Audio Power Plant Premiers here for review.

jason

RGibran
RGibran's picture
Offline
Last seen: 2 years 4 months ago
Joined: Oct 11 2005 - 5:50pm


Quote:
I have no idea how the latest Richard Gray products might affect the sound of my current system. Nor do I have any reason to question the initial post in this thread. I simply know that, after my experience years ago, I have always given the company a wide berth.

ncdrawl
ncdrawl's picture
Offline
Last seen: 12 years 11 months ago
Joined: Oct 18 2008 - 9:18am

Thank you for putting this in words..exactly how I felt as I read that. Good to see that there are others out there that feel as I do.


Quote:
RG" {snip}"

ethanwiner
ethanwiner's picture
Offline
Last seen: Never ago
Joined: Sep 1 2005 - 2:26pm


Quote:
I dont think Serenius was saying that conditioners dont do anything for audio.. he was saying that the model I have didnt produce results for him.


And there's the crux of it! One person reports no difference and the other will gladly buy four units for a total cost of almost $10,000. If that device actually changed the sound in a meaningful way, I'd expect everyone who tries it to report an improvement. But that never happens.

If a power conditioner really did change the sound, that change would be easy to measure in terms of improved frequency response, lower distortion, and/or lower noise. Yet even the vendors are unable to come up with such evidence, instead relying on purely anecdotal reports such as:


Quote:
I picked up a 400pro and can really hear an improvement.

The floor sound immediately goes quieter, have better control and the vocal much warmer - more towards analog soundings.

I have never been so impressed with any other purchase I have made to my system.


If the noise floor was lowered, I expect to see hard data expressed as dB improvement at various frequencies. I'd also expect universal agreement from everyone who tries it, but that never happens.

--Ethan

ncdrawl
ncdrawl's picture
Offline
Last seen: 12 years 11 months ago
Joined: Oct 18 2008 - 9:18am

Ethan, the units are 600.00 a piece. total cost was 2400. 2 for my studio, 2 for my home.

ncdrawl
ncdrawl's picture
Offline
Last seen: 12 years 11 months ago
Joined: Oct 18 2008 - 9:18am

also, Ethan..

It took Serenius paying 3 grand for Nordost(which i see he has a marked investment in) to notice improvement with power conditioning..
at least I am a cheap(er) audiophool.

Id gladly send you one too, Ethan, let me see if I can make that happen..

ethanwiner
ethanwiner's picture
Offline
Last seen: Never ago
Joined: Sep 1 2005 - 2:26pm

Same argument - so change $10,000 to $2,400 and I still have the same opinion.

As always, I have $100 that says you'd never be able to pick out blind whether the RGPC unit is in use or not.

--Ethan

ethanwiner
ethanwiner's picture
Offline
Last seen: Never ago
Joined: Sep 1 2005 - 2:26pm


Quote:
Id gladly send you one too, Ethan, let me see if I can make that happen..


That would be great! Where do you live? Hopefully you realize that if you send me one I will test an audio system with the unit inline and not, and post the results here.

--Ethan

ncdrawl
ncdrawl's picture
Offline
Last seen: 12 years 11 months ago
Joined: Oct 18 2008 - 9:18am

Id expect that you would, Ethan. That is the impetus for my sending it..

Buddha
Buddha's picture
Offline
Last seen: 12 years 5 months ago
Joined: Sep 8 2005 - 10:24am

Hey, Ethan, are there things you can put in parallel to the signal path that would make a measurable difference in the signal path?

I do not know.

Elk
Elk's picture
Offline
Last seen: 3 years 7 months ago
Joined: Dec 26 2006 - 6:32am

ncdrawl, I recall you indicating that you had some results that were measurable - I assume in noise floor. Is this the case?

I suspect that people have different experiences with power conditioners, etc. as their incoming power is different.

PS Audio has been working on methods of measuring the effects of power conditioning equipment, their own and others. I don't know if they have the results out yet but didn't find anything in a quick check of their website.

I have a PS Power Plant Premier (AC power regenerator) that I like a lot. I feel comfortable I could pass an ABX test, but I have no idea how to do it given all the things plugged into it.

But I also can easily hear the difference between certain preamps that measure the same as well. Others that measure the same I can't tell a difference. I still think there is a bit more going on physically that we do not yet know how to measure - or we easily can measure it and do not know how it relates to perception.

ncdrawl
ncdrawl's picture
Offline
Last seen: 12 years 11 months ago
Joined: Oct 18 2008 - 9:18am

hey Elk, yes, the noise floor. Hopefully Ethan will become a believer.

Welshsox
Welshsox's picture
Offline
Last seen: 12 years 3 months ago
Joined: Dec 13 2006 - 7:27pm

Buddha

From my professional life I just cant see any way putting something in parallal can have a major effect.

Electricity is like water, it will find the path of least resistance. It doesnt really matter what tweak or improvement we are talking about, if its meant to affect the actual signal ( Opposed to say isolation feet ) then it really has to be inline with the signal path to be effective.

Alan

bertdw
bertdw's picture
Offline
Last seen: 2 months 2 weeks ago
Joined: Sep 18 2007 - 5:41am

Parallel devices can certainly have an effect. A simple capacitor across the line can remove RF interference by giving high frequencies a lower resistance path to ground. Similarly, an MOV (Metal Oxide Varistor) can divert high voltage spikes without being "in the path."

ethanwiner
ethanwiner's picture
Offline
Last seen: Never ago
Joined: Sep 1 2005 - 2:26pm


Quote:
Hey, Ethan, are there things you can put in parallel to the signal path that would make a measurable difference in the signal path?


Bert has the right idea. If a speaker wire has some resistance and you put another thicker wire in parallel that has lower resistance, some of the current will flow through both but more will go through the thicker wire. However, it's still in series with the audio. What Bert is talking about is true too, though that affects the power feed, not the audio signal path.

BTW, I am not saying power conditioning is never worthwhile, and my own article from Recording magazine shows how to wire up a simple filter to get rid of clicks and pops. Where I draw the line is at claims for improved clarity or fullness etc. If you have clicks and pops when the fridge turns on, a power conditioner like the one in my article will definitely help. But subtle increases in clarity and LF fullness are always placebo effect or due to comb filtering. And if the noise floor really is lowered and you can measure it, that tells me the preamp / amp design is lame and has insufficient built-in filtering.

--Ethan

SAS Audio
SAS Audio's picture
Offline
Last seen: 4 months 4 weeks ago
Joined: Jun 6 2007 - 6:56am


Quote:
What Bert is talking about is true too, though that affects the power feed, not the audio signal path.

BTW, I am not saying power conditioning is never worthwhile, and my own article from Recording magazine shows how to wire up a simple filter to get rid of clicks and pops... that tells me the preamp / amp design is lame and has insufficient built-in filtering.

--Ethan

The RF filter specs state usefulness from approx 150khz to 30mhz. Below 150khz and somewhere above 30mhz the filter has minimal, if any, effectiveness. So audio, FM, TV, microwaves artifacts are not filtered.

You have been very lucky that your setup worked. Your RF filter only works under certain circumstances, not all circumstances.

Would you care to explain why you believe that none of the power supply is in the direct signal path? Afterall, the plate/collector resistor is, isn't it?

Take care.

ethanwiner
ethanwiner's picture
Offline
Last seen: Never ago
Joined: Sep 1 2005 - 2:26pm


Quote:
The RF filter specs state usefulness from approx 150khz to 30mhz. Below 150khz and somewhere above 30mhz the filter has minimal, if any, effectiveness. So audio, FM, TV, microwaves artifacts are not filtered.


None the less, it does a great job of completely getting rid of clicks and pops from electric motors, and that's one of the biggest problems people have with "power." This type of filter will not avoid voltage sags, of course, nor will it protect from lighting strikes or outright power loss. For that you need an UPS and a lightning rod.


Quote:
You have been very lucky that your setup worked. Your RF filter only works under certain circumstances, not all circumstances.


It works perfectly in the situations I described, and not just for me but also for a few dozen others who made the same filter from my plans and wrote to thank me.


Quote:
Would you care to explain why you believe that none of the power supply is in the direct signal path? Afterall, the plate/collector resistor is, isn't it?


A power supply is stiff (low impedance), versus the signal that appears on a tube plate or transistor collector. So assuming a competent power supply design, and small decoupling caps sprinkled around the circuit board at key places, the power supply is supposed to appear as a voltage source with infinitely low output impedance at all frequencies of interest.

--Ethan

SAS Audio
SAS Audio's picture
Offline
Last seen: 4 months 4 weeks ago
Joined: Jun 6 2007 - 6:56am


Quote:
It works perfectly in the situations I described, and not just for me but also for a few dozen others who made the same filter from my plans and wrote to thank me.

A few dozen does not mean it will work in a majority and certainly not all situations.


Quote:
A power supply is stiff (low impedance), versus the signal that appears on a tube plate or transistor collector. So assuming a competent power supply design, and small decoupling caps sprinkled around the circuit board at key places, the power supply is supposed to appear as a voltage source with infinitely low output impedance at all frequencies of interest.

Describing the perfect power supply is totally different than whether the supply is actually in the direct signal path or not. I was hoping you could explain your belief, but evidently not. So my question quoted below remains unanswered.


Quote:
Would you care to explain why you believe that none of the power supply is in the direct signal path? Afterall, the plate/collector resistor is, isn't it?

By the way, I see you needed some RF suppression so your pioneer obviously does not have a competent power supply.

ethanwiner
ethanwiner's picture
Offline
Last seen: Never ago
Joined: Sep 1 2005 - 2:26pm

LOL, dood, you're killing me!


Quote:
A few dozen does not mean it will work in a majority and certainly not all situations.


Well, considering you said earlier that filter won't do anything useful, I guess that proves you wrong.


Quote:
So my question quoted below remains unanswered.


Pity, eh? Guess you'll have to look elsewhere for an electronics education. Here's a good beginners guide:

The Hardware Tutor

I'm glad to answer any follow-up questions you may have.


Quote:
By the way, I see you needed some RF suppression so your pioneer obviously does not have a competent power supply.


Where do you see that?

My Pioneer receiver is fabulous, and there's no noise at all from my speakers even when the volume is cranked way higher than normal. And did I mention the receiver cost only $150 at Costco?

Steve, is your little home-based business so slow that you have nothing better to do than try to harass me? Really man, give it a rest, okay? You look pathetic to everyone reading.

--Ethan

SAS Audio
SAS Audio's picture
Offline
Last seen: 4 months 4 weeks ago
Joined: Jun 6 2007 - 6:56am

Me:

Quote:
A few dozen does not mean it will work in a majority and certainly not all situations.

Ethan:

Quote:
Well, considering you said earlier that filter won't do anything useful, I guess that proves you wrong.

I am sorry guys, but this is what I said.

Quote:
The RF filter specs state usefulness from approx 150khz to 30mhz. Below 150khz and somewhere above 30mhz the filter has minimal, if any, effectiveness. So audio, FM, TV, microwaves artifacts are not filtered.
You have been very lucky that your setup worked. Your RF filter only works under certain circumstances, not all circumstances.


Quote:
Pity, eh? Guess you'll have to look elsewhere for an electronics education. Here's a good beginners guide:

The Hardware Tutor

I am sure your article helps in teaching some basic electronics to newbies. However, I was simply pointing out that at least a portion of the power supply is in the direct signal path, which can easily be demonstrated with a thevenin equivalent circuit model. This means any artificial artifacts in the power supply will enter the direct audio signal path. Also any nonlinearities in the power supply itself will affect the sonic qualities of the music.

I am sorry if you are offended over some additional factual information and irrefuteable evidence being presented to help the consumer in making purchasing decisions.

Log in or register to post comments
-->
  • X